When considering water filtration, the short answer is: NO – you do not need a TDS Meter. Getting your water checked using a TDS Meter will provide a report that explains exactly what’s in the water – including mainly dissolved solids. You’ll find out what contaminants are in your water that causes you concern, and then you can find a filtration solution to meet all of your water goals.
Nexqua presents Dew Imported TDS Meter for RO water with a digital LCD display that can measure TDS/Temp/Ppm and comes with carrying Case (TDS/Temperature Model). In just a push of a single button, the digital TDS water tester will read the overall water purity level, which will be displayed on the digital LCD panel.
This TDS meter is ideal for all water purification applications, thus to check whether your water filter is doing its job right and when to change the filter. It is very easy to use; all you need to do is to put it in the water and test.
Wide Range of Application
A healthy metabolism begins with quality water. TDS meters come in a variety of points ranging in applications. Ideal for
Aquarium and reef tanksDrinking waterRO/DI SystemPools and spasHydroponicsFood & Beverage
Digital LCD Display
This is a state-of-the-art digital TDS meter tester, it comes with inbuilt digital LCD with proper graphics to symbolize every measured value which is easy to read and understand from the display screen. Every value and symbol can be visualizing more correctly with this display.
TDS IN PPM
It can be used to check the performance of your water filter, test the quality of filter water, check for hardness and make sure that you are drinking clean water. Total dissolved solids (TDS) are measured as a volume of water with the unit milligrams per liter (mg/L), otherwise known as parts per million (ppm).
Quick Glance to Directions
Testing your water using a TDS meter is the easiest way to measure for total dissolved solids.
Remove the protective capTurn the TDS meter ONImmerse the meter into the water up to the maximum immersion levelLightly stir the meter to dislodge any air bubbles and wait for the display to stabilizePress the hold button to view the reading out of the waterTurn off the meter, wipe and dry the electrode off before inserting it back into the protective cover
Maintain your TDS meter accuracy: Precautions!
Taking care of any device is more important to experience good performance. Let’s see how to maintain Tds water testing meter
Do not dip the meter beyond the water level limitDo not store the meter in high temperature or direct sunlightDo not attempt to open the housing or tinker with the electronics of the unit
Once the meter is on, the temperature function can be used at any time, in or out of liquid. 2. Press the TEMP button. The display will switch to temperature (in Celsius only). 3. To return to TDS mode, press the TEMP button.
This item can be used to test TDS in RO water purifiers, filters, Aquarium etc
Comes with a protective cover. It is also use for testing TDS of Aquarium water.
Accurate measurement of PPM, Long life. Quality Product from Nexqua
#NEXQUA #Dew #Digital #LCD #Tds #Meter #Water #Purifier #filter #water #testing #Carrycase