WHY CHOOSE YUV TDS & PH METER COMBO ?
When considering water filtration, the short answer is: NO – you do not need a TDS Meter. Getting your water checked using a TDS Meter will provide a report that explains exactly what’s in the water – including mainly dissolved solids. You’ll find out what contaminants are in your water that causes you concern, and then you can find a filtration solution to meet all of your water goals.
YUV presents Dew Imported TDS Meter for RO water with a digital LCD display that can measure TDS/Ppm.
In just a push of a single button, the digital TDS water tester will read the overall water purity level, which will be displayed on the digital LCD panel.
This TDS meter is ideal for all water purification applications, thus to check whether your water filter is doing its job right and when to change the filter. It is very easy to use; all you need to do is to put it in the water and test.
Wide Range of Application
A healthy metabolism begins with quality water. TDS meters come in a variety of points ranging in applications. Ideal for
Aquarium and reef tanksDrinking waterRO/DI SystemPools and spasHydroponicsFood & Beverage
Digital LCD Display
This is a state-of-the-art digital TDS meter tester, it comes with inbuilt digital LCD with proper graphics to symbolize every measured value which is easy to read and understand from the display screen. Every value and symbol can be visualizing more correctly with this display.
TDS IN PPM
It can be used to check the performance of your water filter, test the quality of filter water, check for hardness and make sure that you are drinking clean water. Total dissolved solids (TDS) are measured as a volume of water with the unit milligrams per liter (mg/L), otherwise known as parts per million (ppm).
Quick Glance to Directions
Testing your water using a TDS meter is the easiest way to measure for total dissolved solids.
Remove the protective capTurn the TDS meter ONImmerse the meter into the water up to the maximum immersion levelLightly stir the meter to dislodge any air bubbles and wait for the display to stabilizePress the hold button to view the reading out of the waterTurn off the meter, wipe and dry the electrode off before inserting it back into the protective cover
Maintain your TDS meter accuracy: Precautions
Taking care of any device is more important to experience good performance. Let’s see how to maintain Tds water testing meter
Do not dip the meter beyond the water level limitDo not store the meter in high temperature or direct sunlightDo not attempt to open the housing or tinker with the electronics of the unit
PH Meter Features
Measuring Range: 0-14.0pH Resolution: 0.01 pHAccuracy: ±0.05 pHBattery: 2x 1.5V(AG-13)Auto Temperature Compensation: 0-50°CDimensions: 5.94 x 1.30 x 0.79 inches
How To Use Ph Meter
Remove the protective cap. Do not be alarmed if white crystals appear around the cap. This is normal with pH electrodes and they dissolve when rinsed with water.Turn the meter on sliding the switch on the top.Immerse into solution up to the max immersion level.Stir gently and wait until the display stabilizes.After use, switch off pH meter, use the water clean the electrode and replace the protective cap.
DO NOT USE DISTILLED OR DEIONIZED WATER FOR STORAGE PURPOSES. Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries.
High Accuracy & Easy to Use: The maximum tolerance is less than +/- 2%, and the operation steps are simple.Fast Read & Auto-off Function: Use intelligent detection chip, which can be read on the digital screen of TDS instrument within one second. After 10 minutes of inactivity, the TDS meter will automatically turn off to conserve battery power.Wide Use: 0-9990 PPM measurement range. Ideal tool for testing drinking water, aquariums, RO/DI systems, hydroponics,pool,etc.The large backlight LCD has been upgraded for easy reading, and has an automatic lock function for ease of useTDS meter is equipped with high-quality titanium alloy probes and reliable automatic temperature compensation to ensure that accurate readings are always maintained at various temperatures.
Portable and LCD display: thanks to its compact size, you can easily take it anywhere. The LCD display displays the result within seconds.
Quick measurements: the PH meter provides quick measurements at the touch of a button, easy to read on the large, illuminated display. And this pH meter calibration at the touch of a button.
Fast Read & Auto-off Function: Use intelligent detection chip, which can be read on the digital screen of TDS instrument within one second. After 10 minutes of inactivity, the TDS meter will automatically turn off to conserve battery power.
TDS meter is equipped with high-quality titanium alloy probes and reliable automatic temperature compensation to ensure that accurate readings are always maintained at various temperatures.
#YUVS #TDS #Digital #LCD #Meter #TDS #Meter